Placentex 3ml * 5 vials | Excellent Preventive Treatment to Delay Aging | 5,625mg/3ml (PDRN) | New Manufacturing Date

What is the recommended dosage per injection site when using 9 needle cartridge with ez injector?

When using a 9-needle cartridge with an EZ Injector, the recommended dosage per injection site can vary depending on the specific treatment and the product being used. However, general guidelines can be provided for common applications like mesotherapy or skin rejuvenation treatments. General Guidelines: Dosage Per Site: Typically, the dosage per injection site for mesotherapy or skin rejuvenation ranges from 0.02 to 0.05 ml (or cc) per injection. This small amount ensures even distribution and minimizes discomfort. Depth of Injection: The depth usually ranges from 1 to 4 mm, depending on the treatment area and the goal. For facial treatments, shallower depths (1-2 mm) are common, while deeper injections (3-4 mm) might be used for body treatments. Injection Pattern: Injections are often spaced 1 to 2 cm apart in a grid-like pattern to ensure even coverage of the treatment area. Steps for Using the 9-Needle Cartridge with an EZ Injector: Prepare the Device and Cartridge: Ensure the EZ Injector is clean and properly set up with the 9-needle cartridge. Fill the syringe with the desired solution. Adjust Settings: Set the injector to deliver the appropriate volume per injection (e.g., 0.02 to 0.05 ml). Adjust the needle depth setting according to the treatment requirements. Sterilize the Treatment Area: Clean the skin thoroughly with an antiseptic solution to prevent infection. Perform the Injections: Press the injector against the skin and activate it to deliver the solution. Move systematically across the treatment area, maintaining consistent spacing between injection sites. Post-Treatment Care: After completing the injections, apply a soothing cream or serum to the treated area to reduce redness and inflammation. Specific Dosage Example: For a typical facial mesotherapy session aimed at hydration or rejuvenation: Volume per Injection: 0.02 ml per site Depth: 1.5 mm Spacing: 1 cm apart This approach would cover the face evenly with minimal discomfort and effective delivery of the treatment solution. Important Considerations: Product Instructions: Always refer to the specific instructions provided by the product manufacturer, as different products may have varying recommendations. Professional Guidance: It is crucial to receive proper training and follow protocols set by medical professionals or trained aestheticians when using devices like the EZ Injector. Patient Safety: Monitor the patient’s response to treatment and adjust as necessary to ensure safety and efficacy. By following these guidelines, you can achieve consistent and effective results while minimizing the risk of complications.

Do you need to replace the tips after so many uses.?

Thanks for your question. Sorry to tell you that this device is no longer available, you can try to browse other similar products on the website

With the 1200 needle for the 3.00mm is is it medical grade stainless steel? And can you explain 'what you mean by flat tip needles

For all the needle length of 1200 needle, it is made of medical grade stainless steel. Flat tips means that the needle tip is flat, while some other derma roller are round needle, you can see the details in our website.

What is the correct order to use each of the functions or is there an order. And can you use each function the same day/time of treatment or do you have to wait a few days?

Thanks for your question. There is not a specific order to use each function,and you can use all functions by one time.

I have purchased a product from you before and have been very happy with the product and the service you provide - I would like to have a copy of the instructions for use of this RF device. I'm particularly interested in how often it needs to be used to achieve results and how long the results last - Please send me a pdf of the manual of operation. Thanking you in anticipation.

For the first month, three times a week, after that, twice a week.

How Is the frozen head used? Does it cool the skin DURING treatment, to prevent damage to the skin? Or is it used afterwards/

Dear Customer, For the frozen head, you can use it in target area before RF treatment, normally 10 to 15 minutes, patients will feel very comfortable during RF treatment if have a cooling treatment first. Therapies that use cold temperature can stimulate circulation, then followed by radio frequency, it will be much more effective than only radio frequency treatment.

Hello, What is the lifespan of the bulbs? Will they ever need to be replaced? thank you,

it works at least 10 years, so technically speaking, there is no need to replace the bulbs.

hCan i use this product with i beauty pen? if yes, which needle should i use? thanks

Hi Kari, It can be used with iBeautyPen, the needle length should choose more than 1.5mm.

I’m using P198 exosomes for scalp. What are some options for microneedles? Is there a stamp that fits on the bottles? Thanks Simon

Microneedle DermaStamps (Manual): Great for precise areas like hairlines or the crown. DermaStamp 32 needle is a good choice, ideally 0.5 mm length for the scalp. https://www.ibeautymachine.com/professional/derma-stamp-drs-dermastamp.html Titanium or stainless steel pins are more durable. Some stamps are hollow or meso-style, designed to deliver liquid from a vial through the stamp. https://www.ibeautymachine.com/professional/aqua-stamp-hyaluronic-acid-serum-injection.html iBeautyPen (Electric Microneedling Pen): https://www.ibeautymachine.com/professional/catalogsearch/result/?q=ibeautyPen  Ideal for larger scalp areas. Use 12-pin or 36-pin cartridges, adjustable from 0.25 mm to 1.0 mm.Offers uniform depth and reduces hand fatigue compared to manual stamps. Hydra Pen (with vial attachment): https://www.ibeautymachine.com/professional/microneedling-hydra-pen-h5.html Popular option for exosome application. 12-pin or 24-pin and 36pin microneedle stamp with a 3–5 ml vial on top. Can be filled directly with P198 solution. Note: You’d need to transfer P198 exosomes into the hydra needle bottle, as it likely won’t screw directly onto the P198 bottle.

Is this product power input usb universal? How many leds does this mask have ? Thanks for your time

yes, it is USB port. It has 72 pcs of LED lamp.

Hi, where can i get diamond tip replacement for this device ?

Sorry, this device does have replacement tips for sale

Can you use slimming oil with this device?

Yes, of course.

Can you interchange the pin needle cartridges between the ibeautypen and md pen?

Sorry, the needle cartridges are different

Is the quality fully checked?

Strictest quality test is performed before each shipment. All this make sure our clients achieve profitability with our machines without worrying about quality and performance

Are there single use serums that come with this or a reusable bottle that fits into the top of the device? What serum do you recommend?

yes, we provide serum bottles. You can check this link: https://www.ibeautymachine.com/professional/co2-cartridge-set-for-coolifting-gun.html

Can you use vurtual meso therapy electroproration?

lipolytic solution used for fat reduction is typically administered via injections in traditional mesotherapy. However, using virtual mesotherapy with electroporation for administering V Line A is theoretically possible, although it might not be as effective as direct injections due to differences in the depth and concentration of delivery.

Are there any side effects if you don't use the machine properly? I'm worried I may not understand the instructions and may make a mistake. Do you have to use a gel or can you substitute other creams, lotions or oils? What is the life expectancy of the machine? Is there maintenance or other services that must be performed to the machine periodically?

1. we provide user manual and video for machine training. The software is simple and user-friendly. Our customer has no problem manipulating the machine by studying the manuals. If you have any problems about the usage, feel free to contact us. 2. For cavitation treatment, we suggest apply slimming gel or ultrasound gel before the treatment, it is to help smooth operation and better energy conduction. For Ultrasound , you can use your daily skin care product. 3. After every usage, clean the probes with wet cloth and then dry it. Put all the parts back to the package and keep the package in the shady and ventilated place. With proper maintenance, you can use the device as long as you can.

How do I set the device for cellulite?

Hi Sylvie, You can try to use RF plus red photon function.

Hello, The description mentions red and blue light, but the specifications say green and red light. Which one is it? Thank you

Hello, For the Mask, there is 2 kinds of LED lights, red and blue. Just as you can see on our website description. Thanks for your kindness. Best regards,

Hello, I wanted to know the difference between 110v vs 220v? Thank you

It's no difference, the mainly difference is 110V machine can only be used in these countries which voltage is 110V, and 220V can only be used in 220V countries.