Saline 0.9% NaCl Syringe | Isotonic Solution of Sodium Chloride for Botox Injections | 10ml*50Vials

I want to clarify the frequency of treatments. A patient should have 4 treatments per week for 2 weeks, correct? Then they have only one treatment each week for 2 weeks, correct. A total of 10 treatments in 30 days. The other thing I want to clarify is about the exercise. 30 minutes of exercise should immediately follow this treatment, correct? Can the patient stand on a power plate for 30 minutes in place of exercise?

Hello Heather dawson, Thanks for your inquiry. Which machine do you mean? Or which treatment do you mean? I will give you a reply once get your confirmed reply. I think you were meaning the cavitation slimming treatment, but I am not sure about it, so your earliest response is highly appreciated. Best Regards,

Are all the attachments included for the coolsculpting and laser? the same ones shown in the pictures.

Yes, we will supply all of them together with the machine.

Hello, I am looking for rf skin tightening machine with the frequency of 1~3~10 mhz. I would like to stimurate 1.5mm , 3mm, 4.5 mm deep. Please tell me the best machine. thanks

Hi, we recommend you our microneedle RF machine: https://www.ibeautymachine.com/professional/rf-depth-8-micro-needling-machine-for-skin-lifting.html

What volumes can be delivered with this device? What is the deminsion (gauge) of the needles?

The EZ Injector™ is a versatile mesotherapy device designed for precise and customizable skin treatments. It accommodates different needle configurations, each with specific specifications: • 5-Pin Needle Cartridge: This configuration uses 34-gauge needles fixed at a depth of 1.5mm. • 9-Pin Needle Cartridge: This setup features needles adjustable from 0 to 2.5mm in depth, allowing for tailored treatments based on individual needs. The EZ Injector™ allows operators to precisely control needle speed, ranging from 10 times per minute up to 250 times per minute, enabling efficient and accurate delivery of treatment solutions. Additionally, the device features a vacuum pressure design that gently lifts the skin during injection, enhancing the effectiveness of drug delivery. The duration that needles remain in the skin can also be adjusted to control drug absorption and minimize loss.

Hi. How clean cartridges?

Hi Alla, Thanks for your question. It's easy to clean the cartridge as it's non-invasive. You just need to swap it with cotton pad or something else with medical alcohol each time after the treatment.

What is included with the machine? Do all 3 of the suction probes come with it (small, medium and large) or are they purchased separately?

Hi Chris, Thanks for your question. The default handpeice is only one. The medium one. If you need extra handpiece, you can buy at below link: https://www.ibeautymachine.com/professional/fat-freezing-zeltiq-coolsculpting-applicator.html

Are your machines FDA approved or approved for use in the United States?

Hi Amanda, We answered your question via email, please check it.

who is the manufacturer of this machine and is it FDA approved?

Hi Patrice, It's produced by our factory. We don't have FDA approved for this machine. But we do have ISO and CE certificate, our customers in the US have no problem to receive it.

I purchased this centrifuge and I just received it today. I do not see any balance tubes; If I am only spinning one tube how do I balance it?

You can put another empty tube on the opposite side to balance it.

How many treatments can someone have and what is the treatment frequency? The treatment time is 1 or 2 hours?

Satisfactory result can be achieved after 2 to 4 sessions. The session interval is 1 month. Normally, each session lasts 40 to 60 minutes. depending on the actual situation.

Does this device have FDA clearance or is it applying or FDA clearance? The FDA formally issued a Microneedling Classification Order in June 2018 (https://www.federalregister.gov/documents/2018/06/08/2018-12335/medical-devices-general-and-plastic-surgery-devices-classification-of-the-microneedling-device-for). The Final Order is now codified in the Code of Federal Regulations as 21 CFR 878.4430, which marks the typical 90-days for the FDA to publish a classification order.

Hi David, Unfortunately, we don't have FDA approved.

Are there any concerns for development of gradual hearing impairment, reversible or otherwise, as a result of the tinnitus sustained during cavitation?

As for the noise, if you mean the noise in the head (tinnitus soud),  although our cavitation technology has greatly reduced the sound level, it's very hard to completely reduce it because this is normal for all ultrasound with such low frequency. So we suggest you play some music in your salon or let the customer listen to music to distract their attention. Other suggestions to avoid tinnitus noise is as follows: 1, Don't touch the probe with water. If there is water on the probe during treatment, it will cause loud noise and also heat up very quickly. 2, Use pure ultrasound gel or high quality slimming gel. Please don't use too much gel. 3, Please don't set the energy too high. Reduce the energy below level 30 if patients feels uncomfortable. The lower the energy, the lower the noise. 4, Don't move the probe too quickly. Move it slowly. Place the probe firmly on the treated area. Avoid probe rubbing on the skin frequently.

Hello, 1. what year of the machine made? 2. what all included in the shipping: how many cartridges? is the trolley included in the shipping with the price? 3. is the price negotiable? Thanks. Ruby Chu

The machine is manufactured after you placing the order. So it's made in the month when you purchase it. The default cartridges are 3pcs. But it supports 7 different depth of cartridges. The trolley on our website does include. And if you don't need the trolley, the shipping cost will cheaper. As you can see on our website, our price is fixed, transparent and unnegotiable.

How much is the out put energy J/cm2?

The power density: ≥ 300J/cm² output power: 80mW/cm²

Hi there, wondering if a grid for injection comes with the product? If not where does one purchase the injection grid to guide the administration ? Thank you Kathleen

Sorry, we don't have this in stock now. Kabelline is the same product like this one. As for the grid you mentioned, sorry, it does not have.

Can this be used with the ez injector?

Sure, no problem, it can be used via EZ Injector or other mesotheray injection device

Hi What is the better quality I beauty pen? I see you have two different ones. Also looking for an LED lamp for a professional salon. Which can you recommend?

Both the iBeautyPen 2S and iBeautyPen 3 are high-quality devices. The iBeautyPen 3 comes in two color options and features a more powerful motor. However, it is slightly louder than the iBeautyPen 2S and tends to generate more heat during use. So, the choice depends on your specific needs: If you're looking for a device with a stronger motor, the iBeautyPen 3 is the better choice. But if you're sensitive to noise, the iBeautyPen 2S might be more suitable for you.

Are the nano-needle tips made of silicone?

For this nano needle, it's made of surgical grade stainless steel 316. NOT silicone.

Sehr geehrte Damen & Herren! Ich Habe die Ultraslimm Maschine bestellt und habe den Preis von 1990 Dollar bekommen.Möchte heute den Betrag überweisen ist dies der korrekte preis. Grüße Fröhlich

More details, you can email to support@ibeautymachine.com

Do I need a gel on body with this machine, or is it done on dry skin?

Hi Dr, Anita, Thanks for your inquiry. Yes, gel is necessary for this machine. It will not work if you use it on dry skin directly.